Français
English
Torque transducers
Static, reaction or rotary
SENSY offers a complete range of static (‘non-rotating’) and rotating (dynamic) torque meters.
The measurement ranges available for the first type range from 2 Nm to 1000 kN m.
Depending on the capacity and the environment, our torque meters are available in the following materials: stainless steel, alloy steel, aluminum.
As the standard, you will obviously find the ‘classic’ models with flanges, square or hexagonal tips. In addition, the many options allow you to adapt them to your conditions of use: high temperature (+200° C), low temperature (-50° C), explosive atmosphere, radioactivity, use under pressure or under vacuum, etc.
These sensors are available with different output signals: unamplified analog (mV / V), amplified (V, mA); digital (RS-232, RS-485, USB, fieldbus) or wireless.
We can also offer static torque meters tailored to meet the most demanding requirements. Very accurate torque meters can be used as standard torque sensors for machine recalibration or as industrial torque meters.
Measuring ranges of rotary torque meters vary from 1 Nm to 25 kN m as the standard. The range can be higher on request. Transmission of the torque can be done by shafts with key, square ends, flanges or fluted shafts (PTO) which are typical of agricultural machines.
The maximum rotational speeds are 500 to 10,000 rpm, depending on the model, measuring range and tip type.
| Accuracy | 0.25 % |
| Capacity | 300 Nm, 500 Nm, 1000 Nm,... |
| Universal non-rotating torque meters combining accuracy, sturdiness and easy to install. | |
| Accuracy | 0.25 % |
| Capacity | 500 Nm, 1000 Nm, 2000 Nm,... |
| Universal non-rotating torque meters combining accuracy, sturdiness and easy to install. | |
| Accuracy | 0.25 % |
| Capacity | 50 Nm, 100 Nm, 300 Nm, 750... |
| Reaction torque meters designed to be place between ratchet and wrench. | |
| Accuracy | 0.5 % |
| Capacity | 20 kNm, 110 kNm, 250 kNm |
| High-range reaction torque transducers with square ends. | |
| Accuracy | 0.25 % |
| Capacity | 2 Nm, 5 Nm, 10 Nm, 20 Nm,... |
| Non-rotating torque meters with hexagonal head. | |
| Accuracy | 0.25 % |
| Capacity | 2 Nm, 5 Nm, 10 Nm, 20 Nm,... |
| Non-rotating torque meters with hexagonal head. | |
| Accuracy | 1 % |
| Capacity | 2.5 Nm, 7.5 Nm, 17.5 Nm, 75... |
| Non-contact rotating torque sensors. | |
| Accuracy | 0.5 % |
| Capacity | 1 Nm, 2.5 Nm, 10 Nm, 20 Nm,... |
| Non-contact rotating torque sensors. | |
| Accuracy | 0.25 %, 0.1 % |
| Capacity | 50 Nm, 100 Nm, 250 Nm, 500... |
| Non-contact rotary torque sensors. | |
| Accuracy | 0.5 % |
| Capacity | 10 kNm, 15 kNm, 20 kNm, 25 kNm |
| General purpose, high capacity non-contact rotary torque sensors. | |
| Accuracy | 0.5 % |
| Capacity | 3 kNm, 5 kNm |
| General purpose, non-contact rotary torque sensors with flanges or PTO shaft. | |
Associated electronics
| Universal large panel meters to be used with transducers and process signals. |
| Universal panel meters for using with load cells and process signals. |
| Panel meters with dual line display for Wheatstone bridge sensors |
| Dual independent process input meter. |
| Display for rotary torque sensor |
| Conditioner-amplifier with 4..20 mA and -10..0..10 V output. |
| Hand-held indicator for transducer with mV/V output. |
| Radio transmitter for analogue signals (mV/V, 4..20 mA, 0..10 V). |
| Hand-held wireless indicator. |
| Radio receiver with analogue output (4..20 mA, 0..10 V). |
| Base stations designed to connect wireless load cell (WI-T24TR-xxx) |
| Base station designed to connect up to 8 wireless load cells (WI-T24TR-xxx) |
| Converts the signal from the Wheatstone bridge (mV/V) into a robust industrial standardised 4 to 20 mA signal. |
| Convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Converts the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB. |
| Large digital displays for distance reading |