Comment tarer un afficheur DIP-Fx-yz à l’aide d’un contact extérieur ?

Réponse:

Il est possible de tarer un afficheur DISP-Fx-yz à l’aide d’un contact extérieur libre de potentiel.
Pour ce faire il faut :

  1. S’assurer que le dip-switch « Calib’n lock » soit en position « lock » (on),
  2. Faire un contact temporaire entre les bornes 7 (Common) et 8 (CC.1).

 

 

Array ( [0] => Array ( [id_gomakoil_faq_category] => 1 [link_rewrite_no] => [active] => 1 [position] => 1 [date_add] => 2017-04-12 11:41:35 [color] => #000000 [id_lang] => 2 [id_shop] => 1 [name] => Electronics [description] => [meta_title] => Electronics FAQ SENSY [meta_description] => [meta_keywords] => [link_rewrite] => electronics )) 1 Array ( [0] => Array ( [id_gomakoil_faq] => 12 [id_gomakoil_faq_category] => 1 [link_rewrite_no] => [most] => 0 [association] => 0 [hide_faq] => 0 [name] => Admin [email] => no [by_customer] => 0 [position] => 11 [active] => 1 [date_add] => 2019-05-28 09:41:52 [as_url] => 0 [id_lang] => 2 [id_shop] => 1 [question] =>

How to tare a DIS P-Fx-yz display using an external contact.

[answer] =>

Answer:

It is possible to tare a DISP-Fx-yz display using a potential-free external contact.

To do this:

  1. Make sure that the "Calib'n lock" dipswitch is in the "lock" position (on)
  2. Make a temporary contact between terminals 7 (Common) and 8 (CC.1), with push button for example.

 

 

[meta_title] => [meta_description] => [meta_keywords] => [tags] => [link_rewrite] => How-to-tare-a-DIS-P-Fx-yz-display-using-an-external-contact [link_rewrite_cat] => electronics )) 1